Don’t Want Forced-Air Heating? Know These In-Floor Options

Are you looking for a different way to heat your home that doesn't use forced air? If so, know that there are some alternative heating methods that work by radiating heat up from the floor. Here are a few of those methods that you should consider using when you're exploring heating installation.

Electric Radiant Heat

You may not want forced air because it is impractical to get duct work installed in a particular room. This can be an addition that was put on your home, or maybe a bathroom that has cold tile flooring. You can use electrical radiant heat to ensure that those rooms of your home are warm in the winter.

Electric radiant heat works by installing heating cables underneath the floor that are controlled with a thermostat for that specific room. You can control the temperature, set a schedule, or just use the heat on demand when you are in the room. While you can power the system using your main electrical system, it can also run off of a separate solar powered system.

Copper Plumbing Radiant Heat

If you want to use water to heat your home, you will need to use some sort of plumbing system to get the job done. Copper plumbing is a viable material to use, since the metal itself is a very conductive heating material. You will pay more money up front for the copper plumbing to be installed underneath the floor, but you will definitely see how the material is very effective at doing its job.

Plastic Plumbing Radiant Heat

The alternative method to copper is plastic plumbing, commonly known as PEX. The material is not only cheaper to purchase, but the flexible nature of the pipe means that will install much easier. Joints do not need to be made to make the plumbing wrap around a room like a coil. One potential problem is that it's possible for the PEX plumbing to become damaged while it is being installed, which can be a potential snag in using a cheaper material.

If you're still on the fence about using radiant heat for your home, reach out to a local HVAC contractor. They'll walk you through the pros and cons of using each type of in-floor heating option, and let you know the cost for each one to be installed. There will be no mystery as to how much it will cost if you decide to move forward.