A water softener represents a surefire way to eliminate the many problems associated with hard water, from soap scum, to stiff clothes, to premature appliance wear and degradation. Yet in order to get the most from a water softener, you'll need to ensure that it is installed properly. If you would like to learn more about the art of installing a water softener, read on. This article will provide three tips to ensure the best possible integration between this highly useful appliance and your home's water system.
Consider the water softener's location carefully.
Location is key in ensuring optimum water softener performance with a minimum potential for problems. Naturally, you will want the softener to be located near three things: an electrical outlet, the main water supply pipe, and the water heater. Try to select as level a patch of floor as possible, to prevent the likelihood of salt bridges forming inside of the brine tank. While it is possible to install a water softener outdoors, you will need to ensure that it is well-protected against such things as precipitation and direct sunlight.
Use flex connectors for making connections.
The trickiest thing about installing a water softener is ensuring that it links up properly not only to the main water supply line, but also to pipes that will deliver the softened water to the water heater and other appliances. Fortunately, you can make this process a lot easier by ditching hard, inflexible pipes for what are known as flex connectors.
Flex connectors, which can be found at virtually any home improvement center, allow easy connections to be made even when the softener's outlet/inlet are not at the exact same height as the pipes on either side. They also act to reduce the amount of stress being placed on these pipes. Best of all, that can be installed in a fraction of the time, and without the soldering often associated with joining rigid pipes.
Choose your salt wisely.
Sodium salt is the substance responsible for the transformation at the heart of a water softener, and you will need to keep a large supply on hand for constantly refreshing the softener. Rock salt, which is the least expensive variety, is also the worst for a water softener. That's because the many impurities in rock salt will cause unwanted deposits to form inside of the appliance. Instead, opt for a high quality product such as evaporated salt. The extra expense is well worth it, since it will keep your softener running problem free for years to come. Contact a company like Actionaire Inc to learn more.